0 Selected
  
Compare Products

Rotary Nozzles & Turbo Nozzles
Rotary nozzles are commonly known as Turbo nozzles or Roto nozzles. This type of nozzle produces a rotating, conical spray that pulses, the cone pattern covers a large area, while the rotating, pulsation action results in a deep clean. Rotary Nozzles increase your water blasters cleaning efficiency and are ideal for heavy duty cleaning of wide flat areas like driveways, flooring, roof tops, brickwork and stripping paint.

Note always start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle.

Nozzles

  Name/Part No. Description Specifications
9 Noz 14 Chem Chemical Dump Nozzle
NOZ 1/4 CHEM
Thread Size 1/4" BSP
10 Drain Noz E25120151 Drain Cleaning Nozzle
E25120151
Inlet G1/4M
Max. Pressure 250 bar (3600 psi)
11 Drain Noz E25121051 Drain Cleaning Nozzle
E25121051
Inlet G3/8M
Max. Pressure 250 bar (3600 psi)
13 Multireg Noz IPZREG Multireg Nozzle
IPZREG
Max. Pressure 200 bar (3000 psi)
Max. volume 21 l/min
Temp 60'C
Inlet G1/4F
Outlet 135 140 145 150 155
12 Noz 14 QC Chem Chemical Dump Quick Couple Nozzle
NOZ 1/4 QC CHEM
Generating a 65° spray pattern, the black nozzle produces the least pressure and the most gentle spray. It’s ideal for applying detergent as the low pressure doesn't blast the detergent away or cause any damage. Spray Angle 65'
14 Noz QC 0055 Quick Coupling 0 Deg
NOZ QC 0055
The red nozzle is the most powerful of the five coloured nozzles. It should be used for heavy duty/industrial strength work such as removing tar, resin, glues and rust. Caution should be used and a small area tested to ensure the pressure emitted from this nozzle doesn’t damage the items/areas being cleaned. The use of safety gear is strongly recommended. Spray Angle 0'
14 1 2 Noz QC 15050 Quick Coupling 15 Deg
NOZ QC 15050
Generating a 15° spray pattern, the yellow nozzle puts out serious pressure and is ideal for heavy duty work such as stripping paint, removing grease, rust and oxidation as well as concrete cleaning. Spray Angle 15'
15 Noz QC 25030 Quick Coupling 25 Deg
NOZ QC 25030
Generating a 25° spray pattern, the green nozzle is a good general purpose cleaning nozzle. It’s popular for removing mud, dirt and mould and is ideal for cleaning brick, paving, decks as well as equipment and vehicle wash down in the commercial sectors. Spray Angle 25'
15 1 2 Noz QC 40033 Quick Coupling 40 Deg
NOZ QC 40033
Generating a 40° spray pattern, the white nozzle also produces a reasonably low pressure and is ideal for cleaning down boats and cars, stucco walls, windows, decks and other light duty cleaning applications. Spray Angle 40'
16 Rotojet 030 Rotojet 030 3000 PSI
M0204007320
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 035 Rotojet 035 3000 PSI
M0204007330
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 040 Rotojet 040 3000 PSI
M0204007340
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 045 Rotojet 045 3000 PSI
M0204007350
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 050 Rotojet 050 3000 PSI
M0204007360
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 055 Rotojet 055 3000 PSI
M0204007370
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 060 Rotojet 060 3000 PSI
M0204007380
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 065 Rotojet 065 3000 PSI
M0204007390
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
16 Rotojet 070 Rotojet 070 3000 PSI
M0204007400
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 210 bar (3000 psi)
Inlet G1/4F
Temp 100'C
17 Rotojet 030 Rotojet 030 5000 PSI
M204006900
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 035 Rotojet 035 5000 PSI
M204006905
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 040 Rotojet 040 5000 PSI
M204006910
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 045 Rotojet 045 5000 PSI
M204006915
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 050 Rotojet 050 5000 PSI
M204006920
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 055 Rotojet 055 5000 PSI
M204006925
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 060 Rotojet 060 5000 PSI
M204006930
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 065 Rotojet 065 5000 PSI
M204006935
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 070 Rotojet 070 5000 PSI
M204006940
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 075 Rotojet 075 5000 PSI
M204006945
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 080 Rotojet 080 5000 PSI
M204006950
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 090 Rotojet 090 5000 PSI
M204006960
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 100 Rotojet 100 5000 PSI
M204006970
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 110 Rotojet 110 5000 PSI
M204006980
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
17 Rotojet 120 Rotojet 120 5000 PSI
M204006990
ALWAYS start the machine with the rotary nozzle facing downwards to prevent injuries and also damage occurring to the nozzle. Max. Pressure 350 bar (5000 psi)
Inet G1/4F
Temp 100'C
19 Spray Noz 1 8 00XX Spray Nozzles Stainless Steel 0 Deg 1/8"
NOZ 1/8 00XX(nozzle size)
Spray Angle 0'
Nozzle Sizes 020 025 030 035
20 Spray Noz 1 8 15XX Spray Nozzles Stainless Steel 15 Deg 1/8"
NOZ 1/8 15XX(nozzle size)
Spray Angle 15'
Nozzle Sizes 020 025 030 035
22 Spray Noz 1 8 25XX Spray Nozzles Stainless Steel 25 Deg 1/8"
NOZ 1/8 25XX(nozzle size)
Spray Angle 25'
Nozzle Sizes 020 025 030 035
22 Spray Noz 1 8 40XX Spray Nozzles Stainless Steel 40 Deg 1/8"
NOZ 1/8 40XX(nozzle size)
Spray Angle 40'
Nozzle Sizes 020 025 030 035
23 Spray Noz 1 4 00XX Spray Nozzles Stainless Steel 0 Deg 1/4"
NOZ 1/4 00XX(nozzle size)
Spray Angle 0'
Nozzle Sizes 020 025 030 035
24 Spray Noz 1 4 14XX Spray Nozzles Stainless Steel 15 Deg 1/4"
NOZ 1/4 15XX(nozzle size)
Spray Angle 15'
Nozzle Sizes 020 025 030 035
25 Spray Noz 1 4 25XX Spray Nozzles Stainless Steel 25 Deg 1/4"
NOZ 1/4 25XX(nozzle size)
Spray Angle 25'
Nozzle Sizes 020 025 030 035
26 Spray Noz 1 4 40XX Spray Nozzles Stainless Steel 40 Deg 1/4"
NOZ 1/4 40XX(nozzle size)
Spray Angle 40'
Nozzle Sizes 020 025 030 035
27 TD1 1 4 NptF TD1 1/4 NptF
E23000000
Max. Pressure 220 bar (3200 psi)
Max. Volume 40 l/min
Inlet G1/4(BSF)F
Temp 90'C
28 TR1 Noz Holder 1 4 NptF TR1 Nozzle Holder 1/4 NptF
22000000
Max. Pressure 220 bar (3200 psi)
Max. Volume 40 l/min
Inlet G1/4(BSP)F
Temp. 160'C
29 TR1 Noz Holder 1 8 NptF TR1 Nozzle Holder 1/8 NptF
22000015
Max. Pressure 220 bar (3200 psi)
Max. Volume 40 l/min
Inlet G1/4(BSP)F
Temp. 160'C
H2O MO202903470 500x500 TS 33 Lance Professional Sand Blasting
M0202903470
Max. Pressure 250 bar (3600 psi)
Max. Volume 40 l/min
Inlet M22x1.5M
Nozzle 135
Temp 150'C
IPZESAB1 Sandblasting Head 1.6mm Kit 1 Sand Blasting Head
IP ZTES AB1
Max. Pressure 70/200 bar (1000/3000 psi)
max. volume 8/5 l/min
Inlet G1/4F
MO204005020 Sandblasting Head 250 bar Straight Nozzle for Sand Blasting
M0204005020
Max. Pressure 350 bar (5076 psi)
Max. Volume 40 l/min
Inlet G1/4F
Outlet 1/4 Npt
Temp 90'C
32 TS8 035 TS8 035
E25000012
Max. Pressure 280 bar (4050 psi)
Max. Volume 40 l/min
Inlet G1/4(BSP)F
Temp. 90'C
33 TS8 050 TS8 050
E25000014
Max. Pressure 280 bar (4050 psi)
Max. Volume 40 l/min
Inlet G1/4(BSP)F
Temp. 90'C
34 VANBY 03 VANBY 03
E25101011
Max. Pressure 250 bar (3650 psi)
Max. Volume 40 l/min
Inlet G1/4F
Outlet 03
Temp. 80'C